Autowatch Ghost Immobiliser Installation
The Ghost is the UK's most advanced aftermarket CAN bus immobiliser. It's discrete, doesn't employ LED indications or key fobs and is concealed in the vehicle's wiring.
The user may also turn off the system temporarily by using Transport Mode when renting their vehicle. This guide will take you through the steps of installing the Ghost immobiliser.
Professional Installation
The Autowatch Ghost immobiliser protects your vehicle from key hacking attacks, cloning attacks and relay attacks. The system is connected directly to the ECU of your vehicle and secured by a PIN code you set. It is inaccessible to thieves using diagnostic scanners or other modern methods. It cannot be disabled using circuit cuts.
The system is simple to use, however it is essential to have a an expert installation to ensure a clean and secure connection with your vehicle's ECU. A Thatcham-approved installer can help with the installation and programming of your Ghost system. They can also suggest a tracking system or alarm system to complete your vehicle's protection package.
The first step is to disconnect your battery in order to avoid the possibility of airbag deployment and short circuits. After this is completed the installer is now able to begin work. Hand tools are the most basic to be used for precise connections. A multimeter is a great tool to test electrical values. Insulation tape and cable tie are crucial to ensure connections are secure and keep wiring neat. The Ghost Immobiliser user's guide will provide specific instructions tailored to your model.
During the installation process, it's crucial to select an area for grounding that is free of debris and paint. The installer must ensure that the immobiliser's CAN H as well as CAN L wires are connected to the appropriate ports on the vehicle's ECU. These wires can be connected or soldered based on the model. To ensure a stable and durable connection, it is recommended that you choose a high-quality plug.
After the installation is completed, the customer can activate after the installation is complete, the customer can activate Transport Mode. This allows the vehicle to be used by valet parking attendants or mechanics without needing to know the pin code. To do this, the user must press the button for service on the dashboard 5 times in a matter of 2 seconds. Once this is done the system will verify with 5 indication signals.
The Autowatch Ghost 2 immobiliser is TASSA approved and a highly efficient immobiliser. It's a smart option for those who regularly rents out their cars through platforms such as Turo. Immobilisers can also reduce insurance premiums, since it significantly decreases the risk of theft.
Getting Started
If you're looking for a solution that will secure your vehicle from thieves You can't go wrong with an autowatch ghost immobiliser. It protects your vehicle from being started even if a criminal steals or copies the key. This is due to its high-tech technology, which is designed to stop the engine from starting until the correct PIN code is entered.
The device works by connecting to the vehicle's CAN bus network which allows it to communicate with the ECU directly. It uses the buttons on your dashboard and steering wheel to create a unique sequence that only you can understand. This makes it impossible for anyone else to start your car. Resource is the ultimate system to safeguard your pride and joy. It will keep its value intact in the event that you decide to sell it.
Installing a ghost immobiliser is an easy procedure, but it's important to follow the instructions carefully to avoid issues with electricity and system malfunctions. First, you must locate a power supply of 12V and a solid grounding on the car's chassis. Then, you can begin connecting the wires that will be used to activate the immobiliser. Make sure to use high-quality connectors and soldering methods to ensure a strong connection. Also, ensure that you protect the connections by insulating them by using heat shrink tubing or insulation tape to protect them from short circuits in electrical power and other problems.
After the wires have been connected, you can reconnect the battery and start the engine to test the immobiliser's functionality. After you've confirmed that everything is working correctly and you are satisfied, you can place the immobiliser in a secure location in the vehicle. Be sure to cover it in a secure manner to prevent any thief from taking advantage of it.
The Ghost 2 immobiliser has been TASSA (Tracker and Aftermarket Security System Association), which means it's a top-quality deterrent to car burglars. It provides superior protection against key cloning, hacking and relay attacks, and cannot be disabled without knowing the code. It is also simple to use and is able to be put into an auto valet mode so that your vehicle is not activated when you bring it in for maintenance or an MOT.
Wiring
The Ghost Immobiliser is a cutting-edge security system that is specifically designed to deter theft of vehicles. It is directly connected to the car's CAN bus network and communicates with the ECU and ECU, making it virtually undetectable to your vehicle. Contrary to other aftermarket systems which require the removal of circuit components The Ghost Immobiliser does not interfere with any of the factory settings for your vehicle.
The system is also unnoticeable by thieves using diagnostic scanners. The system does not send or receive radio frequency signals and instead uses CAN data to communication with your ECU. It doesn't even require any modifications to your existing key fobs.
Enter the sequence to disarm (either two or one button) and then turn on the ignition in your car to activate Ghost Immobiliser. The indicator will flash two times to confirm that you've entered the correct code. Once you've verified this, you're able to start your car and drive away in peace.
Once installed, the Ghost Immobiliser will protect your car from hacking and key cloning, while protecting the value of your pride and joy. If you ever need to surrender your vehicle for service or valet parking The Ghost Immobiliser will be temporarily disabled in Transport Mode.
To complete the Ghost Immobiliser installation, you'll need identify the source of power that is constant (12V) and an earthing point. Make sure that both are well-insulated and safe to touch. It's also recommended to use cable tie to secure and bundle the wires, since this reduces the risk of being tampered with by thieves. To avoid making mistakes, make sure to double-check these points and mark them using a label or tape. Check all connections for signs that they are wearing out. Connections that are loose can cause problems with the system, so be sure that they're firmly fixed and well-insulated. Also, don't forget test the Ghost Immobiliser after installation is complete. This will confirm that the unit is operating properly and that all connections and insulation are safe. If there are any issues, make sure to address them immediately.
Testing
The Autowatch Ghost immobiliser is a revolutionary vehicle security system that connects seamlessly with your car's ECU to prevent unauthorized motor starting. Its cutting-edge technology safeguards your car from hacking, key cloning, and other methods that thieves employ to steal cars. The Ghost also works in conjunction with existing alarm and tracking systems to give the ultimate vehicle protection. The Ghost's unique features and discreet design make it a preferred option for car enthusiasts and security-conscious drivers alike.
In order to ensure that the Ghost Immobiliser is properly integrated the Ghost Immobiliser, you must to follow all steps of the installation process. A good starting point is to refer to the vehicle's wiring diagram that serves as a guideline to locate and connecting the required wires. Then, you'll need to identify the power source and grounding points. Once these are found then you'll be required to mark them so that they're easily identifiable during the installation process. Finally, it's important to use top-quality tools and materials. Hand tools are a must to make precise connections and a multimeter can verify electrical values and ensure security. Cable tie and insulation tape will ensure that all connections are tidy. Additionally, a user's manual will give specific guidelines specific to your Ghost model.
Before you begin installing it is important to test the system by entering the PIN code and starting the vehicle. what is a ghost immobiliser will verify that the immobiliser works as intended and will stop vehicle starts that are not authorized. It is recommended that you perform this routinely as part of your routine vehicle inspections to ensure that the system is operating properly.
Once the installation has been completed, you can start driving your car with confidence. The Ghost will help keep your car and its contents secure from thieves who might steal it and ensure that no one can escape with your car without the correct PIN. The Ghost can also be used with a tracker approved by Thatcham to detect any attempts to steal or tamper, allowing you to locate your vehicle in the event of it being stolen.
The Ghost is compatible with a wide variety of vehicles, including those from most major manufacturers. Monty's Locksmith can help you secure your vehicle with this innovative device. Contact us today to learn more about our services and installation options. We are a TASSA registered installer, which assures us that we follow strict guidelines for the installation of our products. This assures insurance companies, customers and law enforcement agencies that all installations are completed safely and in a correct manner.